Spraying some older kitchen cabinets

This is a set of kitchen cabinets that were sprayed at the shop. To get them from this:

To this:

We took the following steps:

Cleaned them well with some degreaser & soap

Sanded them with P600 grit paper

Scuffed them with a red scotch pad

applied 2 coats of RM Diamont mixed 4:1:1:1 – BC00:BC250:BC850:UR50

Applied 1 coat of Glasurit 923-255 with a flattening additive

Since the paint is semi-transparent you will get slightly different results depending on what you spray over. In this case, you are still able to see the original pattern which gives a really nice effect. Its a very cheap alternative to replacing your cabinets, this rang in around $100 in materials. No clear was applied to the underside of the cabinets if you want the best quality possible you could clear the underside & even go 2 coats of clear instead of 1.