Commonly Used Video Products

Here is a list of products commonly shown in RefinishNetwork Videos.

Paint Guns – Basecoat

The most common guns shown on Refinish Network are the Tekna Prolite, Sagola 4600, Sata 5000 HVLP, Walcom HTE Base, and the Iwata LS400.

Paint Guns – Clearcoat

The most common clearcoat guns shown on Refinish Network are the Iwata WS400, Tekna Prolite, Sata 5000 RP, Tekna Clearcoat, Walcom HTE Clear, Sagola 4600 Clear.

Paint Guns – Sealer / Other

Occassionaly you will see a 3M Accuspray used for sealer or primer, the Tekna Primer Gun for UV primer application. Other guns not shown are the Fujispray.

Paint – Clearcoats

Most often, BASF clearcoat (RM or Glasurit) is used which can be found at your local distributor. Most often they meet a Canadian Low VOC emmissions regulation, depending on the timeline and location. Here are some possible alternatives:

Paint – Basecoats

Most often, BASF basecoat (RM or Glasurit)  is used which can be found at your local distributor. Most often they meet a Canadian Low VOC emmissions regulation, depending on the timeline and location.

Paint – Primers

Most often, BASF Primer (RM or Glasurit) is used which can be found at your local distributor. Most often they meet a Canadian Low VOC emmissions regulation, depending on the timeline and location. Here are some possible alternatives:

Polishing Products:

3M is the most commonly used polishing system in Refinish Network Videos.

PPOE / Safety Equipment

Several different paint suits have been spotted in our videos. Many are available exclusively from the BASF Promo store.

Paint Preperation Systems

The most common disposable cup system used in Refinishnetwork Videos are 3M PPS. They have recently changed to design 2.0 which requires a different adapter that is specific to the gun you are using. PPS 1.0 requires separate purchase of a hard mixing cup for use, this is included in 2.0 liner kits. You would have also seen Sata RPS cups used occasionally.

Fillers / Adhesives

For fixing dents and repairing plastic. The most common products shown are made by Evercoat(Body Fillers) or 3M (Plastic Adhesives).