3 oz cups

Back to: Paint and Refinish9 Replies

Home / Forums / Main Forum / Paint and Refinish / 3 oz cups

  • Author
    Posts
  • Charles Smith
    January 16, 2011 at 7:13 pm #27262

    Hey folks anyone know where I can get 3 oz cups that don’t use the pps or decups system? I need something that will work with a sat a rp. Thanks for the help

    Chuck

    Don Wedor
    January 16, 2011 at 9:04 pm #27271

    you mean an older 2000RP or a 3000RP, ? I dont know of anyone making a 3oz cup for any of those guns you can get SATA RPS cups in a 9oz size that will work on all SATA full size guns. maybe you could use a MInijet as the all use smaller cups.

    Ben Hart
    January 16, 2011 at 9:51 pm #27281

    You can get a 3M pps adapter to use with your SATA, then us the PPS cups. Or is this completely out of the question?

    Charles Smith
    January 17, 2011 at 4:15 am #27310

    Have an 3000rp that we use for the community primer gun in the shop, all we have now is the full size cups for it. Was needing something that will allow us to spot prime without having to pull into the booth. Our jobber has offered us one of the 3m guns if we buy a case of the 3oz cups. Cleaning the cups with thinner really isn’t an issue cause we have a machine to bake it off and recycle it. Anyone have any opinions on the accuspray/3m primer guns?

    Chuck

    jackcarlson
    January 17, 2011 at 4:20 am #27311

    well ta be honest i wouldnt bother with the 3 m gun unless the community gun is a real pile

    Ben Hart
    January 17, 2011 at 4:46 am #27316

    [quote=”bondomerchant” post=17238]well ta be honest i wouldnt bother with the 3 m gun unless the community gun is a real pile[/quote]

    I agree. It is a nice enough gun, really nothing wrong with it at all, but not any better than any other reasonable quality unit.

    As for not spraying in the booth, if you intend on putting anything through any gun you will need some sort of ventilation, period.

    Don Wedor
    January 17, 2011 at 5:06 am #27326

    i think whats going on is were are trying to comply with the EPA law for spraying outside a booth with nothing larger than a 3oz cup

    Richard
    January 17, 2011 at 5:07 am #27327

    I’d say start using 3oz mixing cups and call it good. 😉

    jackcarlson
    January 17, 2011 at 5:08 am #27328

    that just cant be done with bens bodywork:rofl :rofl :rofl :rofl :rofl :rofl

    Ben Hart
    January 17, 2011 at 7:24 am #27333

    [quote=”bondomerchant” post=17255]that just cant be done with bens bodywork:rofl :rofl :rofl :rofl :rofl :rofl[/quote]

    What? 3oz is almost enough for 1 door ding :rofl

  • Author
    Posts
  • You must be logged in to reply to this topic.