booth???
- This topic has 3 replies, 3 voices, and was last updated 12 years ago by .
- Posts
going to look at a used devilbiss seim down draft!!!w/air makeup, has a infratech curing booth behind it!! i was told this is what macco used back in the 90,s, any 1 have any info on this setup
I’ve used Devilbiss cross draft and down draft booths. They seem to be good reliable units. Not too familiar with the curing ovens, but I have heard some horror stories from uneven heat, melted parts etc…I am sure there are some guys on here that have a lot of experience with them
the curing booth is a throw in stuff needs to be removed from building by 1st of dec
20 years ago I used a cross draft booth with 8 of the infratech heaters in the booth itself. They had ajustable timers that you could control the cycle times for the heaters.
Yes you could do some damage due to the radiant heat if your not carefull.
- You must be logged in to reply to this topic.