C+ Bumper Repair by Nexson

Back to: Gallery16 Replies

Home / Forums / Main Forum / Gallery / C+ Bumper Repair by Nexson

Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • Author
    Posts
  • Brian
    December 30, 2011 at 5:12 pm #34978

    Just for Jay because he said he still wouldn’t watch haha

    http://www.youtube.com/watch?feature=player_embedded&v=GrdWASGD1RM

    Joe
    December 30, 2011 at 7:17 pm #34980

    Not bad for a rookie 🙂 Looking good!

    Brian
    December 31, 2011 at 12:10 am #34988

    hey thanks Joe!! One day I will get to an A+ but until then I will stay humble.

    Scott
    December 31, 2011 at 2:32 am #34990

    great job. Did you get the run out?

    Brian
    December 31, 2011 at 3:16 am #34991

    Yea, no big deal, just cut it down with 600 a bit and finished it off with higher grits, it wasn’t bad.

    MoCoke
    December 31, 2011 at 6:48 am #34994

    looks good Nex! dont be so rough on yourself with those grades lol

    Anonymous
    December 31, 2011 at 10:13 pm #35011

    Great job nex! I see odg bustin ur balls on the 101 over the lack of adhesion promotor on the plastic. Small area’s like that I tend not to worry about either, never had an issue.

    don prcotor
    January 1, 2012 at 1:17 am #35012

    i suppose you did a good job. didn’t watch the whole thing, so i’ guess great job nex.

    Nelson Hays
    January 1, 2012 at 3:42 am #35015

    Looks nice Nex. You really have a good setup for this stuff.

    Looks like you could use a more substantial stand 😉

    What do you use for color blender? And what gun did you shoot the base with? you said orange cap iwata? I learned my clear cap sucks on light metallics 🙁

    Brian
    January 1, 2012 at 4:04 am #35019

    Mo, if I am not hard on myself then you all will be! haha thanks though!!

    Jimmo, I know the ODG comment didn’t hold much water as I had 180 grit scratches. I use A/P on new plastics scuffed with a pad, but thanks for the support!

    Lild, the video ended like yours, nice and glossy, and with a run of course lol.

    Nelson, It is an iwata lph 1.3 orange cap. I am using DBC500 color blended. it mixes 1:1 with your color on your last coat.

    brandon dingwell
    January 1, 2012 at 4:11 am #35020

    [quote=”Nexson” post=24398] I am using DBC500 color blended. it mixes 1:1 with your color on your last coat.[/quote]
    you could probably get away without it on a bumper job. just something to use when you need it on a tough color when blending a hood or having issues mottling a color

    Dwight
    January 1, 2012 at 10:28 pm #35025

    Great video on the bumper repair and painting job. explain the paint booth setup and ventilation. Is it used in the garage that is attached to your house.

    Brian
    January 1, 2012 at 10:44 pm #35026

    http://www.youtube.com/watch?v=IBrBTDFouYs&list=UU7KWe8zbkwGG2KPVWk3ib-w&index=4&feature=plcp

    Carlos Garcia
    January 2, 2012 at 10:27 pm #35051

    Hi Nexson, happy new year to u, doyou have a video of how u put it together? Thanks

    Brian
    January 3, 2012 at 7:20 pm #35061

    I don’t have a video, but in my video I explain how it is made.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • You must be logged in to reply to this topic.