Clearcoat Sinkage

Back to: Paint and Refinish19 Replies

Home / Forums / Main Forum / Paint and Refinish / Clearcoat Sinkage

Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • Author
    Posts
  • don prcotor
    January 20, 2011 at 9:39 pm #27480

    I suspect the sealer. The easiet thing 2 do is try 1 coat of sealer. Wait 10-15 mins. To fLash and go to it.

    Stone
    January 20, 2011 at 11:30 pm #27483

    clear over cured sanded clear doesn’t pinch , so it’s got to be the undercoats primer or base

    darren
    January 22, 2011 at 7:45 am #27519

    unless it is upol clear..:whistle:

    Stone
    January 22, 2011 at 8:14 am #27521

    [quote=”painter123″ post=17444]unless it is upol clear..:whistle:[/quote]

    :chair

    PAINTPOT
    January 22, 2011 at 8:24 pm #27533

    we use standox water base .we had the same problem,in the end we found dark base colors needed more drying times than light colors.as for your gloss loss its down to not letting your base dry enough.We use blowers six aside
    [IMG]http://i864.photobucket.com/albums/ab207/PAINTPOTS/19-05-10_0832.jpg[/IMG]
    PUT on one coat let dry .check base panel 4 any defects,Then apply to wet coats .let dry and then put your drop coat on at 1half bar.The way the reps say it ,is to put on two wet coats and follow up by a drop coat straight away while wet .Not 4 me ,With water base you need to feel whats best 4 you

  • Author
    Posts
Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • You must be logged in to reply to this topic.