Couple things I’ve done, looking for critique
- This topic has 5 replies, 3 voices, and was last updated 11 years, 5 months ago by .
- Posts
Here’s a some pictures of the last 2 projects I’ve done. Any criticisms are welcome, looking to get better. This 4 runner was done for just materials. It’s Omni 170 epoxy, Omni plus black, and Omni MC161 clear.
This Tundra was done with Omni 170 epoxy, PPG Deltron base, and DC2021 clear. I don’t have many pictures of this one.
I just looked at the pics, and to me it seems like it would be tough to see much of anything in them. I’ll try to get some better shots of the current project and post them up once it’s all done.
Nice job , looks good to me!
Looks good. I like how you do the roof. When you do the sides do the lift parts get in your way?
I lower the lift after doing the roof so the make shift platform is not in the way. However, the columns are kind of a pain in the ass sometimes.
With a car that I can reach the roof, I usually do it with the vehicle on the lift. I can pick it up to get the rockers and stuff. It seems like i get less debris in the clear if I raise the car to max height the instant I am done spraying it. It gets the car up and out of the overspray, and I guess most of the dust and dirt comes off the floor, so it moves the car further away from that as well.
Thanks!
- You must be logged in to reply to this topic.