cts-v project

Home / Forums / Main Forum / Gallery / cts-v project

Viewing 15 posts - 16 through 30 (of 41 total)
  • Author
    Posts
  • February 2, 2013 at 7:35 am #40951

    [quote=”ding” post=29907]very nice. did you use the sem ezcoat on that wheelhouse[/quote]
    Yep ding, I think that stuff is the greatest idea. Makes life easy. The colors match pretty good too, that one is light green. Which wasn’t one of the original colors when it came out, think they recentlt added it.

    [quote=”Ben” post=29906]Sounds great. I’d like to see pics of that back end going on all together.
    Did I mention that you are making it look way too easy[/quote]

    Thank you 🙂 I will keep them coming. Hope to hang the rear tomorrow.

    February 2, 2013 at 8:19 am #40953

    Looks good, looks like your blowing right threw it.

    Those evercoat ez are nice to have around even can use for small breaks threw before base.

    What kind of tittle did the car come with rebuild, clean …. ?

    I’m doing a 2012 carvan for friend right now whole left side getting replaced. Thing hardest thing was taking the 30 plus trim panels off :lol1

    February 3, 2013 at 1:36 am #40968

    Ass is on along with doors and everything is lined up. Ready to weld on monday
    [img]https://lh6.googleusercontent.com/-UavRWTlros0/UQ1P8VLb56I/AAAAAAAAArg/pZ2QZ-K9mhM/s720/IMG_20130202_090048.jpg[/img]
    [img]https://lh6.googleusercontent.com/-L5G0jEMSA_A/UQ1P-G8gILI/AAAAAAAAAro/vN6YeRma5tw/s720/IMG_20130202_120836.jpg[/img]
    [img]https://lh3.googleusercontent.com/-YPhcPoV6Lrg/UQ1QACe9qVI/AAAAAAAAArw/06ym0267V84/s720/IMG_20130202_120859.jpg[/img]
    [img]https://lh5.googleusercontent.com/-2vVK3BZiVlo/UQ1P6QhCkJI/AAAAAAAAArY/dl0GhY8mOcg/s720/IMG_20130202_120853.jpg[/img]
    [img]https://lh3.googleusercontent.com/-XhZCierQdXU/UQ2EY1LuukI/AAAAAAAAAsA/1EwPLh1gc9s/s576/IMG_20130202_153145.jpg[/img]
    [img]https://lh4.googleusercontent.com/-bFI74EoF8Gw/UQ2EbKq63RI/AAAAAAAAAsI/U2_k-V6qzWs/s576/IMG_20130202_151628.jpg[/img]
    [img]https://lh5.googleusercontent.com/-MAZUU6e23k8/UQ2Em6lY58I/AAAAAAAAAsQ/2JBTxQ_Sy14/s576/IMG_20130202_151639.jpg[/img]
    [img]https://lh3.googleusercontent.com/-z0WWLn3qCc8/UQ2Eo1ZC_iI/AAAAAAAAAsY/goCeYUJIUvQ/s576/IMG_20130202_151647.jpg[/img]
    [img]https://lh4.googleusercontent.com/-2pWHW85x_1o/UQ1P1Bl-eJI/AAAAAAAAArA/_i03SUESZB8/s720/IMG_20130202_124010.jpg[/img]

    February 3, 2013 at 1:43 am #40970

    Looks nice man,the hard part is over now,good job :dnc

    February 3, 2013 at 1:45 am #40971

    yeah im in the home stretch.
    Thanks jay

    February 3, 2013 at 6:21 pm #41006

    Very Nice!!

    February 4, 2013 at 6:07 pm #41058

    Keep up the good work,you did one hell of a job

    February 12, 2013 at 5:46 am #41323

    Had the car fully assembled, everything lines up great. Tore it back down for primer.
    [IMG]https://lh6.googleusercontent.com/-Z22x8dLtQ3Y/URleW66dbYI/AAAAAAAAAtc/WWfs4vy7ako/s720/IMG_20130211_122655.jpg[/img]
    [IMG]https://lh6.googleusercontent.com/-2iJQxEGTs2g/URleY5ZtKZI/AAAAAAAAAtk/qvOA1QczcS4/s576/IMG_20130211_122713.jpg[/img]
    [IMG]https://lh6.googleusercontent.com/-dlxZdFPXAaQ/URleaoVWIyI/AAAAAAAAAts/7rVo-ILS73I/s720/IMG_20130211_122721.jpg[/img]
    [IMG]https://lh5.googleusercontent.com/-bfG7gWBsg-4/URlecpvp15I/AAAAAAAAAt0/rs2qVXfOTbM/s576/IMG_20130211_160704.jpg[/img]
    [IMG]https://lh5.googleusercontent.com/-FBljwvEkoIQ/URleeQLS1GI/AAAAAAAAAt8/00E7LMLW3K0/s720/IMG_20130211_160736.jpg[/img]
    [IMG]https://lh6.googleusercontent.com/-IX58XnjaZ50/URlefm-KR7I/AAAAAAAAAuE/mZaFxaQiqlQ/s720/IMG_20130211_160727.jpg[/img]
    [IMG]https://lh5.googleusercontent.com/-ewasrZRbUU4/URlehpQl1wI/AAAAAAAAAuM/6qI_yO-QDiM/s720/IMG_20130211_122633.jpg[/img]
    [IMG]https://lh6.googleusercontent.com/-QHhrorUV2k8/URleiwCxy0I/AAAAAAAAAuU/B70Q0B4HWy4/s576/IMG_20130211_160713.jpg[/img]
    [IMG]https://lh4.googleusercontent.com/-pI22AvlZk_A/URlekUNF4AI/AAAAAAAAAuc/3vHWA1Ig6L4/s720/IMG_20130211_160740.jpg[/img]

    February 12, 2013 at 10:36 pm #41331

    looks like its gonna be a nice car when ya get it finished 😉 looking foward ta the completed pics

    February 16, 2013 at 11:10 pm #41417

    Got everything jambed out, doors on for good. Inside trunk all finished, painted, etc. Pretty much ready for paint and assembly.
    [img]https://lh4.googleusercontent.com/-WL2NSZW29-c/UR_YEc_bBKI/AAAAAAAAAuw/a7mxsgdywvs/s640/IMG_20130216_135027.jpg[/img]
    [img]https://lh3.googleusercontent.com/-36n_BQPsis4/UR_YGOIXCJI/AAAAAAAAAu4/UbP7iwmRmdI/s640/IMG_20130216_135035.jpg[/img]
    [img]https://lh3.googleusercontent.com/-YRj6mzBNtC4/UR_YIgdFG-I/AAAAAAAAAvA/ujr9YGldFCE/s512/IMG_20130216_134945.jpg[/img]
    [img]https://lh6.googleusercontent.com/-df3BXX9X8c8/UR_YMKQiElI/AAAAAAAAAvI/bQ5yV2n4GCE/s640/IMG_20130216_134921.jpg[/img]
    [img]https://lh3.googleusercontent.com/-9P-fkcNQ4Uc/UR_YO4y4YGI/AAAAAAAAAvQ/lfigwHSJ-kc/s640/IMG_20130216_134958.jpg[/img]
    [img]https://lh4.googleusercontent.com/-uhg7d7O9oR4/UR_YRqbqmvI/AAAAAAAAAvY/bCwoig5pP_w/s640/IMG_20130216_135057.jpg[/img]

    February 16, 2013 at 11:14 pm #41418

    Very nice. it’s come a long way in a short amount of time. :cheers

    February 20, 2013 at 6:02 am #41510

    Stayed a little late tonight and got her painted.
    [img]https://lh6.googleusercontent.com/-nm7eKW61WXo/USQtrkELPPI/AAAAAAAAAwE/yq85HMYdWEA/s1024/IMG_20130219_201932_673.jpg[/img]
    [img]https://lh6.googleusercontent.com/-QJ3xlhIlnhQ/USQtqIWdWxI/AAAAAAAAAv8/1OAP2HP0BvM/s576/IMG_20130219_201900_955.jpg[/img]
    [img]https://lh4.googleusercontent.com/-XTCO75j6Eg0/USQto4KEmCI/AAAAAAAAAv0/_FPQ3iw_ICA/s576/IMG_20130219_201945_755.jpg[/img]
    [img]https://lh5.googleusercontent.com/-4xdvaE6gXSc/USQtnUCLWhI/AAAAAAAAAvs/bo_VN-sDmTQ/s1024/IMG_20130219_202002_295.jpg[/img]

    February 20, 2013 at 7:03 am #41513

    Nice Job.

    February 20, 2013 at 7:03 am #41514

    :cheers

    February 20, 2013 at 7:19 am #41517

    Looks like its all come out great…so close now! I look forward to seeing it assembled.

Viewing 15 posts - 16 through 30 (of 41 total)
  • You must be logged in to reply to this topic.