Got some Tips???

Back to: Paint and Refinish28 Replies

Home / Forums / Main Forum / Paint and Refinish / Got some Tips???

Viewing 15 posts - 1 through 15 (of 29 total)
1 2
  • Author
    Posts
  • Anonymous
    June 8, 2008 at 7:39 pm #10579

    As you may have noticed, I’ve redone the layout for the tips at the top. I am looking for more to add, if you’ve got some let me know. thanks!

    John
    June 9, 2008 at 2:52 am #10580

    Don’t bet on Lucky 7 in the second.

    Anonymous
    June 9, 2008 at 4:33 am #10581

    :laugh: :laugh:

    thanks nighthawk, I could have used that the other day.

    John
    June 9, 2008 at 8:25 am #10591

    Seriously…

    I think one of my top tips would be to [u]always[/u] get the PDS (Product Data Sheet) for every product you use, and follow it to the letter!

    jackcarlson
    June 9, 2008 at 8:36 am #10593

    depends was it written for california???hehe

    ShawnSurridge
    June 10, 2008 at 12:47 am #10603

    Never tell the rep from ministry of health that you don’t use the air mask because you can hold your breath for up to 5 minutes at a time.No sense of humour.

    Anonymous
    June 10, 2008 at 1:08 am #10605

    don,t skip a step B)

    John
    June 10, 2008 at 7:14 am #10614

    Using 36 grit to speed up stripping off the paint does *not* speed up the job!

    jackcarlson
    June 10, 2008 at 7:23 am #10616

    ya night hawk is right 24grit on the ol souix body grinder with a star cut disc is WAY faster right on nighthawk GITTERDONE!!!!!:laugh: :laugh: :laugh:

    brandon dingwell
    June 16, 2008 at 3:54 am #10703

    double check the can that you grab before you pour. DX330 wax and grease remover does not make a good reducer for DBC base:blush: . Gums up really fast:(

    John
    June 16, 2008 at 8:56 am #10706

    [b]bondomerchant wrote:[/b]
    [quote]ya night hawk is right 24grit on the ol souix body grinder with a star cut disc is WAY faster right on nighthawk GITTERDONE!!!!!:laugh: :laugh: :laugh:[/quote]

    Why doesn’t anyone make 14 grit??? Sure would speed up productivity & make knocking down my bondo work less of a chore.

    John
    June 16, 2008 at 8:57 am #10707

    Here’s a serious tip…

    Do a sprayout card, and clear it, to make sure you have a good color match, before you shoot the entire job.

    Anonymous
    June 16, 2008 at 8:44 pm #10710

    that ones good, i’ll add it. thanks

    jackcarlson
    June 16, 2008 at 9:10 pm #10711

    kinda funney that most of the painters i know never do that one till they get into trouble i always feel like a minority but also a guy should take notes on that card ive kicked myself in the ass for not doing that:angry:

    brandon dingwell
    June 17, 2008 at 3:57 am #10717

    [b]Nighthawk_S wrote:[/b]
    [quoteWhy doesn’t anyone make 14 grit??? Sure would speed up productivity & make knocking down my bondo work less of a chore.[/quote]

    They call that a cheese grater

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 29 total)
1 2
  • You must be logged in to reply to this topic.