hey, we can butt match right?
- This topic has 15 replies, 10 voices, and was last updated 13 years, 9 months ago by .
- Posts
ask the boss. “i figure that with the gap inbetween the bed and the cab should be enough to break it up”, “do a spray out and see how close it is.” so as you can see, by now, i feel like my opion doesn’t count. so i break out the enviro color chip and see that i have a blendable match, and let the boss look at it. so, it falls on his shoulders if we have to repaint it.
so this is how it went.
09 tundra blue pearl met.–8s6 is the code.
the bedside was fixed, primed one end to the other. i would of blended it. for those of you wondering about how well water matches, well now you can see. lucky maybe.this is a shoot in the booth
now the outside shoots.
looks a touch dark
but I see you got the peel down pretty gooddon’t hate becuase i can match factory peel.:cens :cheers but it drove off the lot at 5.:clappy
Well, I’d say that’s dead on, just need to buff the cab.
why did you take the taillamp out but leave the bumper and top rail molding on
good butt match don…i would be too chicken… :woohoo:
looks like u used the 3070 hardener in that one:whistle:
the body guy took that out. he fixed some damage aroung that area.
[quote=”painter123″ post=19128]looks like u used the 3070 hardener in that one:whistle:[/quote]
guilty as charged. so:ban? me why don’t ya. seriously, i meant to use 95, but wasn’t paying attention.:deadhorse :hunt:rofl i don’t care what u use it looks like your getting good results:weights
With a minor buff on the door. you should be good to go. :rock
ban requests have been issued for much less….BAHAHAHAHA!!!! :hunt :hunt
looks good in the pics ta me lild;) 😉 but most the time those boxes dont match the cab from the factory anyway i think its cuz the paint em at a diff factory so ya might have ta reshoot it with a color a lil more off than that ta bring it back ta tru pre accident condition nice job bubs:cheers :cheers
[quote=”bondomerchant” post=19138]looks good in the pics ta me lild;) 😉 but most the time those boxes dont match the cab from the factory anyway i think its cuz the paint em at a diff factory so ya might have ta reshoot it with a color a lil more off than that ta bring it back ta tru pre accident condition nice job bubs:cheers :cheers[/quote]
I usually butt boxes to cabs. With the Envirobase and Autowave we’ve had some great matches.
We butt match our bedsides to cab corners all the time, and we do ALOT of full size trucks. The way I look at it is if the boss says to do it, then its his problem if it doesnt work, and if it doesnt work, he can pay me to blend the rest. Looks great though! customer will never notice that its a touch dark…….:P 😛 😉
- You must be logged in to reply to this topic.