Inlet pressure Minijet 4400RP
- This topic has 1 reply, 2 voices, and was last updated 10 years, 8 months ago by .
- Posts
Sata recommends 2.5bar / 36psi.
But most of my paint manufacturers – the paints i use – recommend 2.0bar / 29psi at the gun.
What to do?
Try it at both pressures and see which one you prefer. However, if you are gonna go based off the recommendations, I would use the paint companys as long as it’s for that specific gun.
- You must be logged in to reply to this topic.