Iwata LS400 – Supernova question., need help…
- This topic has 3 replies, 4 voices, and was last updated 14 years, 6 months ago by .
- Posts
Hi,,,
I just got a ls400 basegun, 1.4
i need help on setting. i was spray 19-20 psi sikkens’ autowave
i’m getting blotchy on base all the way when i do the drop coat.. what should i do, i had no problem with lph400 extreme base.
thx.
Hello, i use a devilbiss GTI 1.2 fluid tip and a 110/115 aircap, depends on the lightness of colour. I use sikkens in work aswell & some times depending on the colour, silvers & light colours don`t lay down nice, but doesn`t look so bad outside. I never used a ls400, ask one of your mates if you can try theirs if they have a different model ? Sorry i can`t be more help 😉
Jump over to asetusa.com and talk to Hub and the guys over there. Its an Iwata site. 😉
i was doing the same lol
its down to fluid controll
one of the most common things for bltchyness is too much fluid
as said hub is the man to advise you
tommy
- You must be logged in to reply to this topic.