Jayson asked for another Bumper Video

Back to: Gallery11 Replies

Home / Forums / Main Forum / Gallery / Jayson asked for another Bumper Video

  • Author
    Posts
  • Brian
    January 30, 2012 at 5:47 pm #35639

    So here ya go! :p

    Open to critques guys, thats why I make them.

    http://www.youtube.com/watch?v=WnZOHGwSPLs

    Don Wedor
    January 30, 2012 at 9:04 pm #35642

    Well I hope your sister is ok (you bought her a respirator atleast I hope)

    lil tidbit on the what you call a clear base – DBC500 is not

    DMD649 is the clear base and is used in the base formulas

    DBC500 is used as an intercoat clear and a clear carrier for tricoat finishes / Blender.

    I’m mean you are correct about the DBC500 I just dont want you to forget about DMD649.

    video was good. great job Nex.

    Craig
    January 30, 2012 at 9:32 pm #35643

    Nice job Nex…great tunes as well :).

    brandon dingwell
    January 30, 2012 at 9:43 pm #35644

    [quote=”Wydir” post=24981]Well I hope your sister is ok (you bought her a respirator atleast I hope)

    lil tidbit on the what you call a clear base – DBC500 is not

    DMD649 is the clear base and is used in the base formulas

    DBC500 is used as an intercoat clear and a clear carrier for tricoat finishes / Blender.

    I’m mean you are correct about the DBC500 I just dont want you to forget about DMD649.

    video was good. great job Nex.[/quote]
    DBC500 is basically the mixing clear and binder of the rack. 😉 No need to buy it if you have a mixing system.

    Brian
    January 31, 2012 at 1:53 am #35645

    At least the music sounds good! Music makes any type of video. I am just trying to give jimmo a run for his money,

    Scott
    January 31, 2012 at 2:20 am #35646

    Great job Nex :cheers

    Jayson Munro
    January 31, 2012 at 4:38 am #35647

    I did ?? :wak

    Brian
    January 31, 2012 at 4:46 am #35648

    subconciously, yes :nothingtoad

    MoCoke
    January 31, 2012 at 5:34 am #35650

    looks like it turned out great. i never saw or herd of anyone using blender around sealer edges before but i guess it works out okay looks like i learned something new if that’s an acceptable practice? good job

    Brian
    January 31, 2012 at 5:57 am #35652

    yea, it helps to melt in those edges, blover mentioned at his shop, the painter always did it.

    I always run over it with 800 just in case after it is flashed

    ryan brown
    January 31, 2012 at 6:12 am #35653

    Cool vid, but you lost me once you started playing Nickelback, seriously man? :sick:

    :cheers

    Brian
    January 31, 2012 at 6:37 am #35655

    [quote=”ryanbrown999″ post=24992]Cool vid, but you lost me once you started playing Nickelback, seriously man? :sick:

    :cheers[/quote]give me some props for linkin park and creed though! haha

    thanks ryan :cheer:

  • Author
    Posts
  • You must be logged in to reply to this topic.