Keeping eyewear clean

Home / Forums / Shop Operations / Keeping eyewear clean

  • Author
    Posts
  • May 22, 2010 at 7:03 pm #21463

    I have to wear glasses and need them while painting as well. Does anyone have the same problem as I with constant overspray on the lenses. I have tried cleaning them with reducer and even buffing with a mild compound. Does anyone have and tips or tricks that will help with this situation.

    May 22, 2010 at 7:29 pm #21464

    :unsure: razor blade :unsure:

    May 22, 2010 at 7:37 pm #21465

    Dont understand. Wont that scratch the lenses. How should I go about this

    May 22, 2010 at 7:47 pm #21468

    buy new ones :lol1

    May 23, 2010 at 8:07 am #21516

    i use a full face fresh air system when i clear and a fresh air half mask when i paint. the face mask will help. it takes some getting used to but worth it in the end. :cheer:

    May 23, 2010 at 7:35 pm #21523

    They sell screen adhesives for them…just peel them off when cloudy and put a new one on..I couldn’t tell you where to get them because I haven’t bought one yet I had to choose between the Sata fresh air system or a SuperNova Iwata . :wak

    May 24, 2010 at 3:54 am #21543

    When my glasses get coated, I take a small piece of claybar put a drop of dish detergent on the lense, wet the bar and rub away. It will get all the overspray off .

    May 25, 2010 at 5:08 am #21560

    good idea on the tear off. You could use the thin peal off film that they use on cell phones and trim to fit. Once it get to a point you cant see, take it off and replace it. You can get them on eBay.

  • You must be logged in to reply to this topic.