need help with metallic stripes and splotches.
- This topic has 21 replies, 14 voices, and was last updated 13 years, 10 months ago by .
- Posts
I agree with ding. 70 is too fast, that is causeing your problem. If you wantn I think ding suggested u can mix 70 w/85 & 50/50 mix. Or just go with the 85.
whats going on lild u won’t touch anything with 885 with it.. so don’t go recommending it to anyone…:compsmash even tho i would totally recomend the 885 reducer with all metallic colors with the ppg deltron..
just because i can’t use it for worth a crap, doesn’t mean some one else can’t use it. i did say mix it 50/50 with some 70.
Why whats wrong with 85?
[quote=”Whitesnake” post=18173]Why whats wrong with 85?[/quote]
nothing. the question is whats wrong with llid :whistle:hey,
i had the same problems with my iwata ws400 and ppg dbc
just get a test panel and run reccomended pressure at gun pull the fan in a little tad and play about with the fluid
the fluid supply is were your going wrong … if its to wet it will go rashy looking and stripes …. keep turning it down till its med wet…not wet
some may not agree but this was my first iwata and thats how i cured my same probs
AND THEN I COMPLEATLY SOLVED IT BY MOVING BACK TO SATA :p
I agree with this guy^^^^
- You must be logged in to reply to this topic.