New to the forum!

Back to: Introductions19 Replies

Home / Forums / Main Forum / Introductions / New to the forum!

Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • Author
    Posts
  • Richard
    February 9, 2011 at 12:19 pm #28258

    :welc

    Anonymous
    February 9, 2011 at 9:26 pm #28268

    :welc :cheers

    Enjoy your stay! :hunt

    Han Kim
    February 10, 2011 at 12:41 am #28273

    :welc

    ABDUL CHATILA
    February 10, 2011 at 7:23 am #28289

    :welc
    I use RM and I think it’s extremely user friendly. When blending metallics I always lay a wetbed and most of the time I will move up one reducer level to slow it down. It gives the metallics a little more time to lay out correctly. If you are spraying in 80 degrees you should definatley be using UR60 anyways, with the UR50 your metallics are drying too fast and causing the mottling. I shoot with a Sata 3000 HVLP 1.3 and have no problems at all. Good luck and be sure to ask if you have any problems. You will be sure to get the most help from the guys on this site!

    MoCoke
    February 11, 2011 at 2:17 am #28319

    :welc keep active on the site!

  • Author
    Posts
Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • You must be logged in to reply to this topic.