quater panel replaced?

[J’s]

J’s

December 24, 2009 at 9:12 pm #18264

FOUND this site
it has the quater panel info

looks like im goign to have to take these piece of the junkyard
1,3,and 4

(CLICK ON THE LINK BELOW)
http://www.trademotion.com/partlocator/index.cfm?action=getJointLocator&siteid=214857&chapter=&Sectionids=0,2769&groupid=51899&subgroupid=2769&componentid=0&make=25&model=240SX&year=1991&graphicID=3713150&callout=1&catalogid=2&displayCatalogid=0

[tim kupec]

tim kupec

December 24, 2009 at 11:43 pm #18271

Please keep in mind this is about a $1500 car undamaged. I think you really should consider the free route of racking, pulling, pushing, beating a little bit first. :whistle:

[Dennis B.]

Dennis B.

December 25, 2009 at 12:13 am #18274

airhead
In your posts it seams you talk about other sights and of pics but there’s no links?

That work you posted looks nice by the way welcome to the sight! :welc

If that was my car I would do as the others have said and try to fix it as best you can first.
Even if you end up changing the quarter youll need all the pinch welds back were there supposed to be.

Just me but Id part it out and look for another one with a bad engine/Tranny or a bad front end and sell the parts, Like some one else said its only a 1.5k-2k dollar car its worth more in parts than it is as a whole car.

You can make money with lower end cars like this but you have to be smart and not loose your butt in the labor you put into them or Buying the parts for them, You also have to buy them right, for me I wouldn’t pay more than 300-400 for that car 500 is pushing it especially for a 2000 dollar car fixed.

[J’s]

J’s

December 25, 2009 at 12:49 am #18276

OK fixed the link problem.

i havent bought the car yet im still thinking if i should.
i tried to talking him to 200$ dollars for the car explained the damages to him and what i have to get done to fix it.
he didnt want to take the offer because the money he spent on the re built motor.

ill keep on pushing him for 200$. if not ill prob just end up saving up more to get one in better condition.

Im also in a refinishing class its almost my 1yr and a half doing work.
i learned alot and i wouldnt mind spending time on this quater panel for my learning journey lol.
ive never done a quater panel replacement nor using the alingment machine.
maybe i could learn alot this way. take it to the next level.

[Author]

Posts