sata 3000
- This topic has 19 replies, 10 voices, and was last updated 11 years, 10 months ago by .
- Posts
[quote=”xtremekustomz” post=28651]I’ve got a 3000rp with a 1.3 and have never sprayed a high solids clear with it. Has anyone sprayed the RM DC5335, Spies 8035 or Dupont 72500S with this setup?[/quote]
Yep, 72500. With a 1.3 it is pretty happy.
Thanks guys for answering. I bit the bullet on a 4000rp.
Cheers
to the best of my knowledge there is a bushing in the HVLP air passage ,it may be possible to remove this and if so it may allow the gun to be used with an RP set up [quote=”whitey” post=28468]How you doing fellas,
Just a quick question, can I swap the air cap and nozzle in an rp for a hvlp set to convert the gun?
Cheers[/quote]
Interesting to see that some of you are slightly going in a different direction in regards to fluid tip sizes, I find that people over here are starting with 1.3’s and moving down to 1.2 fluid tips , especially with uhs clears, some find the smaller droplet size leaves a smoother look and feel to the clear and also reduces the chances of solvent pop during the bake cycle.
I always used a 1.4 in the 3000rp 😛
- You must be logged in to reply to this topic.