SATA GUN ADAPTER

Home / Forums / Main Forum / Introductions / SATA GUN ADAPTER

  • Author
    Posts
  • July 5, 2010 at 7:34 pm #22353

    Hey What’s up fellow’s, im new to the world of autobody repair and paint, i’m looking to get some knowledge and advice from your experience. i will be taking a evening college course in the fall , so i can work on my and my families vehicles. I’m also doing it to use as a hobby and maybe some money out of it? i purchased a sata jet rp2, off ebay and it appears to have a fitting on it.i have a sata gun cup that when i remove the fitting it fits directly on the gun. Just wondering if anybody can tell me what cups is the fitting used for? I also would like to ask, would it be better to use a 1.4 nozzle for base and coat, rather than a 1.3? that’s what i have on the gun….thanks for any advice you can help me with, and look forward to gaining some knowledge from you guy’s.. thanks peace… :pcorn: [img]http://www.refinishnetwork.com/media/kunena/attachments/legacy/images/PICTURES_SATA_PAINT_GUN_051-20100705.jpg[/img]

    July 5, 2010 at 8:55 pm #22360

    That is an adapter for 3M PPS cups. Not sure what to tell you about the nozzle size. I have never used an older RP.

    July 6, 2010 at 12:11 am #22370

    Thanks, i appreciate it, will look up the 3m pps cup system..peace..

    July 6, 2010 at 12:23 am #22371

    Try the 1.3 first. It puts out plenty of paint.

    July 10, 2010 at 2:18 am #22594

    Thanks, will do! peace”

  • You must be logged in to reply to this topic.