sikkens clear coat ?????

Back to: Paint and Refinish3 Replies

Home / Forums / Main Forum / Paint and Refinish / sikkens clear coat ?????

  • Author
    Posts
  • russ knoche
    June 14, 2013 at 9:30 pm #43393

    any one useing autoclear hs +, what hardner and reducer??? bakeing time + temp??? air drying times , wet sand buff times ,any info would be great

    Jayson Munro
    June 15, 2013 at 3:58 am #43395

    Check the tds sheets they are available online :readthis: We used a crapload of HS+ for many years at our shop.We used autocryl rapid hardener,rapid production standard activators with a sata rp 1.4 at 30-32 psi wide open settings.The rapid hardener worked good for us instead of standard hardener as it is slow drying.We still sprayed completes with the rapid and standard and their is a slower activator but can’t remember the name.Also we baked it at 140F for 37 mins.Any othr questions just ask.

    jeremy bishop
    June 15, 2013 at 5:20 pm #43398

    Same here, always used the rapid autocryl hardener even on all overs. I always used the extra slow activator when doing all overs in the summer here. From what I remember it is pretty fast with the rapid hardener and production/rapid activator. Been a while though :whistle: :p

    link to tds: http://www.globalsafetynet.com/akzonobel/pdfs/akzo_357_english.pdf

    David Clark
    June 21, 2013 at 8:00 am #43436

    I have been told that in the near future hs+ will be phased out. I switched to hs+ 2 pack a few months ago and love it, I think it’s better than the old HS+.

  • Author
    Posts
  • You must be logged in to reply to this topic.