Spare work for the holiday
- This topic has 33 replies, 13 voices, and was last updated 11 years, 7 months ago by .
- Posts
Hey guys. So I go away next week and I’ve just finished all these from 11 hour days from the last two weeks
Nice!
Nice work!
Factory finish on the L200/Triton was never [u]that[/u] good! You’ll make the rest of that vehicle look like crap. 😆
How did you go repairing the tailgate? Chase the damage halfway across the panel? They’re shockers. Like trying to repair a piece of paper.
Nice work. :cheers
yeah that looks really nice! good job!
Hey rikka that triton looks like its got a killer peel free finish. What paint and spray equipment did you use on those jobs?
hey guys
thanks for the comments. im using rm diamont and the colour code for the l200 is x08.
i use a iwata w400 1.2 for base and layed down three coats and a blend into awet bed
for the clear i used diamont top ms as its a truck i layed down a drop coat and two wet coatsim usind a devillbiss pro lite with a 1.3 and te10 cap i love this gun 😛 , after that i used 2000 to de nib then blocked down with 3000,
for the polishing i started with
3m fast cut
farecla liquid cut/ and g- techniq p1
farecla fine cut
3m anti hologramm remover
zaino polish
then finished with a farecla super gloss wax topthe tailgate only had scratvhes along the top from the after market lid so it was easy to sand and prime etc etc…lol i went to town on the truck as hes a new spare time customer to me and id rather sent it out better then it should then have the job back in a month and for him to not be happy
i use all the same set up for the other jobs part fronm the wheel which i finished off with a sata mini jet to lay the clear down with three light coats
This is my private collection of products I use a d charge outLooks like you have a very nice setup going there, Nice work!
- You must be logged in to reply to this topic.