Supernova Hybrid

Back to: Paint and Refinish47 Replies

Home / Forums / Main Forum / Paint and Refinish / Supernova Hybrid

Viewing 15 posts - 1 through 15 (of 48 total)
1 2 3 4
  • Author
    Posts
  • David Clark
    October 27, 2011 at 7:45 am #33813

    Have any of you guys used the LS400 hybrid? Just curious how it sprays. I have been demoing the hvlp ls400 silver cap gun for the past week. Ive got to say, I was sceptical at first but I really like it for energy pro and HS+. I never thought it would spray energy pro like it does due to how slow it is. Its pretty slow, slower than I would like but it does me a great job. I have no plans of buying one right now, that is not until I demo the Hybrid and a sata 4000RP.

    Steve Baran
    October 27, 2011 at 7:49 am #33814

    Get yourself a 3000RP and call it done. You’ll be much happier.

    David Clark
    October 27, 2011 at 8:07 am #33815

    [quote=”Red Baron” post=23263]Get yourself a 3000RP and call it done. You’ll be much happier.[/quote]

    I have been using a 3000 rp also. It does a good job but its loud and a material hog.

    ryan brown
    October 27, 2011 at 3:03 pm #33820

    I have used one with a 1.4 nozzle a few times. It was too large of a nozzle for the clear I’m using so I can’t really give you a good comparison. One thing I did notice was it did put out more material but didn’t seem to atomize as good. I wasn’t immediately impressed though. I would like to try the WS400 version more than the LS personally.

    I will say my W-400lv does do a nice job with HS+.

    brandon dingwell
    October 27, 2011 at 3:54 pm #33821

    [quote=”Red Baron” post=23263]Get yourself a 3000RP and call it done. You’ll be much happier.[/quote]
    You obviously havent been over on autobodystore lately :rofl :rofl :rofl

    David Clark
    October 28, 2011 at 4:37 am #33833

    [quote=”ryanbrown999″ post=23269]I have used one with a 1.4 nozzle a few times. It was too large of a nozzle for the clear I’m using so I can’t really give you a good comparison. One thing I did notice was it did put out more material but didn’t seem to atomize as good. I wasn’t immediately impressed though. I would like to try the WS400 version more than the LS personally.

    I will say my W-400lv does do a nice job with HS+.[/quote]

    Thanks Ryan! I am still thinking about converting my LPH into a W400LV. I just use my lph for sealer alot thats why I havent yet. I have been using my LPH for HS+ and Energy pro and havnot had that great of results. I usally get runs trying to make it look good. So I started using the 3000 rp and it looks way better but I still tend to put it on heavy. Using the supernova, It goes down slick, just slowwww. I dont get runs with it like I do the other two guns. I just dont want thst to happen with a W400LV.

    Steve Baran
    October 28, 2011 at 4:55 am #33834

    [quote=”Underpaid Painter” post=23282]So I started using the 3000 rp and it looks way better but I still tend to put it on heavy..[/quote]

    Easy fix, get a smaller nozzle.

    David Clark
    October 28, 2011 at 5:01 am #33835

    [quote=”ding” post=23270][quote=”Red Baron” post=23263]Get yourself a 3000RP and call it done. You’ll be much happier.[/quote]
    You obviously havent been over on autobodystore lately :rofl :rofl :rofl[/quote]

    Just went over and checked out autobodystore. It looks like you an Jayson started a real s@#t storm over there! Thats why I dont go there much. Everyone is just so in love with that stupid plus gun.

    ryan brown
    October 28, 2011 at 5:03 am #33836

    What nozzle size do you use?

    This may not be the answer you want but if the Supernova is giving you the results you like, just deal with the speed or bump the nozzle size up one. I would rather have a slow gun that gives me the desired results than a fast gun that gives you fits.

    HS+ isn’t my go to clear for great looks anyway. It is alright but it can be a bit finicky in my opinion. It is not Superior

    Jayson Munro
    October 28, 2011 at 5:09 am #33837

    [quote=”ryanbrown999″ post=23285]What nozzle size do you use?

    HS+ isn’t my go to clear for great looks anyway. It is alright but it can be a bit finicky in my opinion. It is not Superior[/quote]
    I agree 100% I only miss it when it is very hot out for completes.Energy pro is not much better,it can be finicky also.
    If you wanty to know I use a 1.4 in my 2000,3000,4000rp’s

    brandon dingwell
    October 28, 2011 at 5:13 am #33838

    [quote=”Jayson M” post=23286][quote=”ryanbrown999″ post=23285]What nozzle size do you use?

    HS+ isn’t my go to clear for great looks anyway. It is alright but it can be a bit finicky in my opinion. It is not Superior[/quote]
    I agree 100% I only miss it when it is very hot out for completes.Energy pro is not much better,it can be finicky also.
    If you wanty to know I use a 1.4 in my 2000,3000,4000rp’s[/quote]
    Got ya again jay. You told me you missed HS+ :rofl :rofl :rofl

    Jayson Munro
    October 28, 2011 at 5:25 am #33840

    I do :rofl

    Steve Baran
    October 28, 2011 at 5:33 am #33841

    Really wanna miss HS+, sample the 2pak version. OMG

    brandon dingwell
    October 28, 2011 at 6:24 am #33842

    [quote=”Red Baron” post=23290]Really wanna miss HS+, sample the 2pak version. OMG[/quote]
    Once I get rid of what I have, there wont be any more sampling of sikkens products :whistle:

    ryan brown
    October 28, 2011 at 6:39 am #33843

    [quote=”ding” post=23291][quote=”Red Baron” post=23290]Really wanna miss HS+, sample the 2pak version. OMG[/quote]
    Once I get rid of what I have, there wont be any more sampling of sikkens products :whistle:[/quote]

    h8tr! Since you buy all your parts from Keystone I dont see why paint is any different! :p

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 48 total)
1 2 3 4
  • You must be logged in to reply to this topic.