Today we switched over to PPG
- This topic has 8 replies, 9 voices, and was last updated 11 years, 1 month ago by .
- Posts
So far I really like it! Sprayed omni single stage on the crx hood, and dbc base on the fender.
Out with the old,
In with the new
You sell out, now am I the only one left here using Sherwin products?
DBC is a nice system, hope it works well for you. Which clears are you starting with, 3000/4000?
Well hot damn Jack,I wish you well with your new system :cheers If I was using dbc I would use concept 2021 for bigger jobs and 2042 for smaller ones.You can use dcx61 hardener or the faster one to speed things up,2021 is a pretty versatile clear that works in any booth.I would use k38 for primer,dont bother with k36.Good luck 😉
Jayson, Im curious why you say to skip K36. I tried to get some K38 the last time I made an order and they were backordered on it. So I got the K36 instead. Seemed to work ok, but was a bit thinner.
Looks good. Hope you have some more tints hiding somewhere :whistle:
They’ll probably set you up with the DAS primers and sealers, which arent a bad product for everyday work.
2042 can be a little yellow at times. dc3000 and 4000 are probably gonna be your work horse clears. but as jay said 2021 is a nice overall clear and can be speed up with some acceleratorwell i dont know why the kid came up as anonymous but we are pretty happy with the way the stuff sprays time will tell …. i sure like not having as many toners ta contend with plus the smaller machine gives me a place ta set my beer :cheers i think we made a step in the right direction for the shop an for the future
Looks good bondo. Good luck with it.
Atta boy Jack….. Im sure you will make it work just fine
I think you made a good decision I agree with other members other than 2042 don’t waste your time on that one concept 2001 is your mop and glow clear good :rock and again welcome to the dark side
- You must be logged in to reply to this topic.