VW and Autowave

Back to: Introductions10 Replies

Home / Forums / Main Forum / Introductions / VW and Autowave

  • Author
    Posts
  • brandon dingwell
    March 16, 2011 at 5:12 am #29577

    here’s a 2004 Pisspot had to put a quality tong yang fender and repair the door .
    Before
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00432.jpg[/IMG]
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00433.jpg[/IMG]

    Somehow I forgot the photos of the filler :whistle:
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00434.jpg[/IMG]

    Sprayed it with Autowave and HS+
    First coat of base
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00436.jpg[/IMG]
    the bald guy showing me how to blow :S
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00437.jpg[/IMG]
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00439.jpg[/IMG]

    all cleared up
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00440.jpg[/IMG]
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00441.jpg[/IMG]
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/p_00442.jpg[/IMG]

    Barry Overby
    March 16, 2011 at 5:22 am #29579

    Is bondo visiting?

    darren
    March 16, 2011 at 5:34 am #29580

    That looks like it turned out great..Looks like your green door handle removal tool got stuck taking the handle out..

    Ben Hart
    March 16, 2011 at 6:48 am #29582

    Looks good.

    I did a front end on one recently…rad support, fender, hood etc…all aftermarket junk. Taking the handle out was probably the easiest part :lol1

    ryan brown
    March 16, 2011 at 2:23 pm #29586

    Looks good Ding. I think you will fit in well with all the other Sikkens assholes around here. You already won half the battle, you just need Sikkens now! :rofl

    Those handles are pretty tough to pull out. :whistle:

    brandon dingwell
    March 16, 2011 at 3:54 pm #29590

    [quote=”ryanbrown999″ post=19352]
    Those handles are pretty tough to pull out. :whistle:[/quote]
    I know. But with my luck something would drop down inside the door and I would have to take the whole thing apart :chair

    Joe
    March 16, 2011 at 6:05 pm #29594

    They only fall apart if you dont know what your doing.. They take about 30 seconds to remove… You didnt even blend the hood you hack 🙂

    brandon dingwell
    March 17, 2011 at 12:59 am #29601

    [quote=”Joe@FCAB” post=19360]They only fall apart if you dont know what your doing.. They take about 30 seconds to remove… You didnt even blend the hood you hack :)[/quote]
    Like I said. With my luck. Plus my helper would be doing the reassy. Took him 5 hours today to put the fender liner on, change a taillight, change a headlamp bulb and buff the lights. I didnt have that much time in the disassy, repair and paint :chair :chair
    Why blend the hood. I was using Sikkens after all :p

    nick
    March 17, 2011 at 2:14 am #29602

    [quote=”ding” post=19367][quote=”Joe@FCAB” post=19360]They only fall apart if you dont know what your doing.. They take about 30 seconds to remove… You didnt even blend the hood you hack :)[/quote]

    Why blend the hood. I was using Sikkens after all :p[/quote]

    I agree never blend wings into bonnets (fenders into hoods)

    My paint scheme seems to cope, that would make it quite a big job in my opinion.

    I have done it before but very rarely

    Lloyd
    March 17, 2011 at 5:09 am #29611

    Look like something you outta get paid for Ding, good deal!!!

    brandon dingwell
    March 17, 2011 at 5:11 am #29612

    [quote=”TheDoctor” post=19374]Look like something you outta get paid for Ding, good deal!!![/quote]
    I did 😉

  • Author
    Posts
  • You must be logged in to reply to this topic.