Well I got it in the Booth

Back to: Paint and Refinish13 Replies

Home / Forums / Main Forum / Paint and Refinish / Well I got it in the Booth

  • Author
    Posts
  • brandon dingwell
    February 14, 2009 at 10:43 pm #12747

    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-352S.jpg[/IMG]

    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-355S.jpg[/IMG]

    gotta shoot the clear in a few

    Anonymous
    February 14, 2009 at 10:52 pm #12748

    where’s the fuel door?

    jackcarlson
    February 14, 2009 at 11:22 pm #12749

    looks good ding other than the bottom of the doors are gonna have a tape line in em:laugh: :laugh: :laugh:

    brandon dingwell
    February 14, 2009 at 11:28 pm #12750

    Tape line was my preppers fault. he didnt scuff any further down:( and i wasnt gonna take the time to do it.
    gonna paint the fuel door when i do the bumpers.

    Heres the clear
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-360S.jpg[/IMG]

    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-358S.jpg[/IMG]

    The BK Shot. Still no watch though:blush:
    [IMG]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-359S.jpg[/IMG]

    jackcarlson
    February 14, 2009 at 11:53 pm #12752

    dirty or not that looks pretty dam nice dingB) B)

    Joe
    February 15, 2009 at 12:13 am #12754

    Looks real good! Nice job!

    ryan brown
    February 16, 2009 at 2:49 am #12759

    Looks good Ding! What clear did you put on that one? Hows Glasurits red metallic cover?

    Anonymous
    February 16, 2009 at 3:06 am #12760

    I’d bet on 3 coats

    brandon dingwell
    February 16, 2009 at 5:56 am #12763

    it’s a pretty transparent red. but it does cover fairly well. i was putting the coats on light and think i did 5. if i put em on heavier i probably would have gotten away with 3.
    The clear was Napa’s Martin Senour line 15420. a very nice clear at a fraction of the cost of the glaso stuff

    ryan brown
    February 16, 2009 at 4:08 pm #12765

    5 coats still isn’t bad for a red metallic. Some of Duponts is in the range of 8 or 9 coats. That is a nice looking clear.

    brandon dingwell
    February 16, 2009 at 4:41 pm #12766

    I sprayed a red acura mdx one time with dupont. I think I had about 8 coats with that thing

    Dave Connolly
    February 16, 2009 at 9:51 pm #12768

    Looks good, Red is very tranparent. Allways put on more thant Dupont says.

    Han Kim
    February 16, 2009 at 10:45 pm #12769

    What a sweet booth and setup! That would be a dream for me.

    And with Chromabase, 8-9 coats minimum for metallic reds. More like 12. But now i lay down a few coats
    of solid red after sealing (either reduced epoxy or 2K). Glad it’s not such a common color…

    It’s a lot of film build and the way the flares sit flush with the panels, the paint has to be cured well.
    Otherwise, it will dig into the paint easily should someone lean on them.

    Matthew Smith
    February 20, 2009 at 4:09 am #12811

    Thats slick DingerB)

  • Author
    Posts
  • You must be logged in to reply to this topic.