What guns are you guys using?
- This topic has 20 replies, 18 voices, and was last updated 12 years, 3 months ago by .
- Posts
Sup Everyone,
Please post down what guns you use for each specific job (ex: primer, base coats, clears).
I use:
Base coats: Iwata LPH-400 w/ 1.3 orange cap.
Clear coats: SATA Jet Digital 2000 RP w/ 1.4 cap
Primers: Non-brand name HVLP gun w/ 1.8 cap.What about you guys?
[b]Kudos,[/b]
JayBase: Iwata WB400 WBX gold cap 1.3
Clear: Iwata WB400 WB2 blue cap 1.3
Primer: Devilbiss PRi 1.8
Primer Iwata LPH440 1.6
Sealer Iwata W-400lv 1.4 or LPH-400 1.4
Basecoat Sata 3000 hvlp 1.4HC and Tekna 1.4
Clearcoat Sata 3000 RP 1.2 or 1.3(depends on weather) and sometimes Iwata W-400lv 1.3Primer: SATAjet 100 BF HVLP 1.7
Sealer: SATAJet 3000 HVLP 1.4
Base: SATAjet 3000 HVLP Digital 1.3
Clear: SATAjet 3000 RP Digital 1.3
All guns used with 3M PPS cups.I thinks it’s obvious I am partial to SATA :rock
Primer-Eminent compliant gun with a 1.5(made in holland)these guns are tough as sh@t,we bought 4 of them in 1987 and replaced them last year.
Sealer=Devilbiss plus with a 1.4
WB basecoat=sata 3000 hvlp with a 1.4HC
Single Stage=first gen Sata rp with a 1.4
Clear=Sata rp 3000 with a 1.4
Solvent base=Devilbiss plus with a 1.4 or first gen sata rp 1.4
*Sealer gun: sata NR 2000 1.4 *.Autowave SATA 3000,1.4 . * HS+ Clear Sata 3000 1.3. All Sata’s for me 😉 Sikkens sealer,paint & Clear
polyprimer sata klc-p 2.5
primer: sata 100b hvlp 1.9
base: lph400 / orange 1.4
clear: sata 3000rp 1.4 / iwata lph400 1.4
touchup guns: lph80 1.0 / sata minijet 3000 1.0Primer: War-Wick 878H 2.0
Base metallics: Sata NR2000 1.4
Base solids: Iwata LPH400 1.4 silver cap
Clear: Iwata LPH400 and Sata NR2000
Backup gun: Sata RP 1.4
Mini gun: Iwata LPH80 1.2 and a few CAT mini guns
Useless junk: Sharpe FinexPrimer/sealer – W400 LV2 with 1.3, 1.4 or 1.8 depending on application.
Or Devilbiss PRI 1.6
Basecoat – Iwata W400 WBX 1.3
Clearcoat – Iwata WS400 1.3 Clear
Mini gun – Iwata LPH80 1.2 E4Poly – Devilbiss FLG3 (1.8 – 2.2 Tip)
Primer – Sharpe SGF98 1.5 Tip, Devilbiss FLG3 1.8 Tip
Sealer – Devilbiss CVI HVLP 1.4 Tip, Sharpe T1-CG 1.4 tip
Base – Sharpe SGF 98 1.4 Tip (I’ve tried many different base guns, and I just like the pattern on this POS.)
Clear – Iwata LPH400, Devilbiss CVI Trans-Tech 1.4, Sata RP 1.3
Worthless POS: Devilbiss Starterline. (Biggest waste of money ever.)
Primer: HD eco roller with 5/8 nap
Sealer: Whats that :blush:
Base: Solids- HD eco roller 3/8 nap
Metallic- Lowes Kobalt roller 1/8 nap
Clear: Lowes Kobalt roller 3/4 nap for 1 coat application
:stoned :stoned :stonedIt shows Ding. :lol1 :lol1 :rofl :rofl
Primer – Sata ??? (Shop Gun) Huge Tip
Sealer – DeVilbiss GTI 1.3
Base – Sata 3000 WSB 1.3
Clear – Sata 3000 RP 1.3
:hij:
gophers – 22. cal (great for jammin)
:squirrels, groundbirds, and even bear – 22. cal/ 20 gauge over under (nice overall gun)
:deer – savage 110 (good for bigger jobs)
:ducks – Remington 870 (nice wide pattern and works with water born)
:whistle:
All round favorite – crossbow :pcorn: (really quiet for night shooting) 😉
I want a double barrel paint gun :stoned
[b]Stone wrote:[/b]
[quote]:hij:gophers – 22. cal (great for jammin)
:squirrels, groundbirds, and even bear – 22. cal/ 20 gauge over under (nice overall gun)
:deer – savage 110 (good for bigger jobs)
:ducks – Remington 870 (nice wide pattern and works with water born)
:whistle:
All round favorite – crossbow :pcorn: (really quiet for night shooting) 😉
[b]I want a double barrel paint gun[/b] :stoned[/quote]
…but could you handle a double barrel paint gun, it has a lot of kick when you pull the trigger. :lol1
- You must be logged in to reply to this topic.