what y’all think
Home / Forums / Main Forum / Gallery / what y’all think
- This topic has 5 replies, 4 voices, and was last updated 12 years, 12 months ago by don prcotor.
- AuthorPosts
- January 10, 2012 at 6:35 am #35208
how this should be done.
what i want to do is,….after detrim and sticker removeal
1—use air craft striper, then use the spray on rust converter (apply some gunk and turns rust into a sprayable surface) 180, epoxy, then seal paint.
or
2–use air craft striper, and may 80 grit the rust area and follow up with 180, then finish off with epoxy, seal, paint.as far as i can tell it looks just to be surface rust, being hopefull. i don’t want to put more time into something that’s not worth it. by the way a shop deal not a personal one.
so tell me what would be best for the rust removal so as i don’t have to do it again, with min. time involved.
Attachments:January 10, 2012 at 7:32 am #35212we don’t have any blasting media or equipment here, so that’s out.
January 11, 2012 at 6:52 am #35226i’m a do one better. the boss said that he was going to have the guy pick the parts back up, he didn’t realize that what the guy wanted done when they talked over the phone.
- AuthorPosts
- You must be logged in to reply to this topic.