Who sprays Glasurit 90 line and wat can u tell me
- This topic has 3 replies, 3 voices, and was last updated 11 years, 10 months ago by .
- Posts
What can u tell me about glasurit 90 line water and from primer sealers base and clear i need to know all i can about the product
I wish I had the time to go over it all, I did do a 2 day course on just the basecoat so if there’s something more specific I can help you with it. I have a ton of videos of me spraying RM Onyx which is basically the same thing @ http://www.youtube.com/jimmo4life look at any from last year and the chances are it’s Onyx. I always still used the glasurit wet-bed that I’d apply on my blend panels at the start.
The primers and clears are like any other line really, you can order a variety of different speeds of clear depending on your shop needs. You may find them to be a bit thicker but they lay down really nice. The tech sheets on the BASF website will give you all the info you need for equipment recommendations and you can see drying times and maybe choose a clear accordingly. Being in a low-voc area I was a bit limited on selection but I liked the 923-222 & the black & white primers you can mix to any value, I don’t recall the numbers.
Am I right in thinking the 90 line is made up of toners very similar to solvent based toners, but use a more waterbourne binder??
So less prone to be turned to custard if froze.hey jimmo whats your favorite gasurit clear coat i strayed 923-200 i didnt mind it. but i have sprayed better clears but the base i liked alot tho
- You must be logged in to reply to this topic.