[mark]

mark

July 28, 2011 at 2:57 am #31933

Hi guys

Im just an apprentice and the guy who is teach me told me never to use a D.A. on large panels to cut the filler because he said that you can make waves. :unsure:

[mark]

mark

July 12, 2011 at 3:55 pm #31675

:clappy the roof came out nice

[mark]

mark

June 30, 2011 at 2:48 pm #31492

:welc

[mark]

mark

April 23, 2011 at 4:42 pm #30468

Hey bondo i used the usc gun. It dose work great. I love that gun

[mark]

mark

April 23, 2011 at 4:37 pm #30467

I just went to a two year collage and now im getting the rest of my experience on the job.
I think this is the way do it.

[mark]

mark

February 15, 2011 at 10:29 pm #28526

thanx jack. your a great friend;)

[mark]

mark

February 7, 2011 at 4:01 pm #28227

:welc rodney

[mark]

mark

February 2, 2011 at 6:07 am #27995

Hey bondo i looked at the truck and that truck had alot of work done. Every piece was painted. Under the truck was super clean. Very nice truck bondo:cheers

[mark]

mark

February 1, 2011 at 7:46 pm #27980

wow it came out really nice. :pcorn:

[mark]

mark

January 31, 2011 at 5:19 pm #27894

It you over an 1/8″ the bodyfiller can crack

[mark]

mark

January 31, 2011 at 4:24 pm #27889

very nce work nexson:pcorn: :cheers

[mark]

mark

January 31, 2011 at 4:19 pm #27888

I agree with ben. You need to grind the entire area down to the bare metal. When the grinding is down then mix up some bodyfiller and apply.
Do not make the bodyfiller more then an 1/8″. After it dries sand it with 80 on a block then apply a second coat of bodyfiller. Sand this also with 80 on a block
with a guide coat and get as level as you can. You can also use 120 to clean up the featheredge.

[mark]

mark

January 29, 2011 at 5:20 pm #27780

hey ben isnt marrage wonderful :rofl

[mark]

mark

January 28, 2011 at 3:53 pm #27756

hey ben i was thinking the same thing. why is he molding the fender:pcorn:

[mark]

mark

January 28, 2011 at 3:49 pm #27755

just remember more is better :rofl

[Author]

Posts