brandon dingwell
Forum Replies Created
- Posts
[b]bondomerchant wrote:[/b]
[quote]write the frametime for 15 hrs:P 😛 :P[/quote]
thats funny. saw that on 101.
protect what do you think of travelers?around here they are one of the better companys. they hire appraisers thay actually know a little something about a car.
a little money and you can be certified in anything:woohoo:
translation:
friend taped up car with 12″ paper around paint area. left rest of car uncovered. no overspray got on car. I spend countless hours taping and baging car and overspray finds its way under masking job and sticks to car. what the f#$kthe upper rail and apron are hammered. the lower rail has a kink in it to. I’ll just section one in. not sure if I should have put it on the frame rack or just used the tree;)
I have a web site but haven’t updated it in about 4 years. Guy built it pretty cheap. I got a quote of revamping it from a company up here. $2500 for a basic site up to $5000 if I want to incorporate any flash stuff with it. Ouch:blink:
no more yellow page ads for me. i put it in when i opened shop but like i said i have’nt got any work from it. I can use the money elseware
that was for jimmo the aerosol part
[b]bondomerchant wrote:[/b]
[quote]ms vinyl wash nice stuffB) B) B)[/quote]
stop pimping that napa stuff would ya;) . I don’t like aerosol etches. I do a lot of bare metal stuff so I usually etch and epoxy. If I switch i’ll find out.i read that section first. what do you use for an etch? it seems you use more of the rm primers than the glaso?
Guess just me and mg71 maintain their booth. MG do you use the peelable coatings from general. I checked em out quick and they seem alot more reasonable than what I am using as far as price goes
some in progress pix
[img]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-087S.jpg[/img]
[img]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-089S.jpg[/img]
[img]http://i288.photobucket.com/albums/ll186/paintbyding/MVC-092S.jpg[/img]
Amazing I was able to post those yesterday:unsure: . I even had to upload them to photobucket first.
Thanks Jim, I sprayed the white first then the red. Both colors were tri coats. Then cleared and sanded and did the stripeFord dealer just brought me an 08 edge. Just needs a bumper cover. Neglected to mention the quarter was all mashed up under the cover “just pull it out a little”:unsure: . I cann’t do that. It needs to be nice some poor fool is gonna buy that car and I need to sleep at night. also got in an olds intrique needs rt3/4 nose and air bags
[b]jimmo wrote:[/b]
[quote](I take a red scotch pad to em first) I find the direct to e-coat sealer to expensive to be used for cut-ins. BASF’s anyhow.[/quote]
Ya but how much are you really using on the jambs. plus you could hang em up and seal the whole part at once