Ken

Forum Replies Created

  • Author
    Posts
  • July 13, 2010 at 8:14 am #22733

    So then I guess my last questions would be? What is the best gun for shooting glass like clear? Would it make any difference if I used the 1.3 tip instead of the 1.4 tip for clear? Lastly Is the sata 3000 digital a bad choice for a beginner and is this a good gun for paint? Oh also if by volume you mean more clear or paint I fully understand and it makes perfect sense, since last night I had a major break through with the sata gun.. As I was tying to let the clear run and I started spraying alot slower to see what happend and their it was… Clear as glass!!!! But the part where I followed all the steps and tried to get it perfect, just looked like orange peal again??Thanks Sorry for all the questions but I think this will slove all my painting issues… Thanks again.

    July 12, 2010 at 6:39 am #22698

    O.K I will try it again.. but this time I will install a regulator and see what happens… I thought that sata recommens two bars or 29psi all the time? Is that not correct?
    THANKS.

    July 11, 2010 at 8:47 pm #22684

    No I have three guns two from harbor frieght the purple one with a 1.4 tip on it and a sata 3000 digital. So I thought that I should be able spray a clear cloat equivilant to oem factory? This has been a learning experiance. I will try to do it again today. Thanks.

    July 11, 2010 at 9:29 am #22677

    Do I need one of those wall mount air filters? I don’t have one maybe that is the problem? Or maybe I just don’t have the skills? WTF? Well Can you get orange peel on your paint or does that just happen on your Clear coat?

    July 11, 2010 at 7:56 am #22673

    Yea, the hose is a 25 ft 3/8. I am painting right now…. 🙂 Using limco white on a computer case trying to use my old harborfreight gun but with the 35 psi and the paint and clear looks way better… Thanks for all these tips. Hey when I shoot the paint two and tree coats, should it be glassy looking before the clear and then the clear coat? will that make it real glossy? I am shooting the second coat of clear. 20 min flash time.. Thanks

    July 10, 2010 at 10:14 am #22617

    Yea just a couple of secs than just drops to 28 29psi. The compressor is set to 100 psi. So I guess I should be ok?? Thanks for your input.

    July 10, 2010 at 9:49 am #22614

    Roger that… but When I pull the trigger the display shows 35 34 then just levels out at 29 or 30 psi… But shouldn’t it just always just be 29 psi stable? :huh: