[Mike Murphy]

Mike Murphy

January 26, 2013 at 4:31 pm #40639

I bought the Sagola primer gun from Len and it is by far the best primer gun I have ever used. I have sprayed 4:1 feather fill, shop line, and DPS 3500 with it and it did great on all of them. I am very impressed with it. I didnt try slick sand with it though because of the 1.8 tip. I have a cheap 2.3 tip gun for that. But keep in mind I have never used a Sata primer gun, so I cant compare the two. But I cant imagine anything laying nicer than this Sagola.

[Mike Murphy]

Mike Murphy

January 26, 2013 at 4:52 am #40622

Yeah its 3M red. I got at it with some 80 grit first and it didnt do it with that. I will try some purple next time.

[Mike Murphy]

Mike Murphy

January 25, 2013 at 6:18 pm #40601

Should have said this was with 120 grit paper.

[Mike Murphy]

Mike Murphy

January 25, 2013 at 4:58 pm #40598

[quote=”Jayson M” post=29520]You bet utech 3.5(voc restricts 3.8 :blush: ) I use a first gen sata rp 1.4 30-33psi wide open fan and materials,75% overlap 3-4 inches away form the panel.We spray a ton of utech single stage and polybase.[/quote]

Dang! With those settings and distance, you must have to really be hauling ass to keep the material off the floor!

[Mike Murphy]

Mike Murphy

January 25, 2013 at 4:38 pm #40592

Man everything is made in China! I just thought it was kind of a neat concept. I was looking on the wall yesterday and noticed I have 6 guns hanging there. Thats a lot of bucks hanging there.

[Mike Murphy]

Mike Murphy

January 25, 2013 at 7:17 am #40585

And I thought I found the next greatest thing?! Does seem like a great idea though. Anone ever tried one?

[Author]

Posts