[jim]

jim

February 2, 2011 at 7:30 am #27997

Hi everyone; im new to the site . Norton makes an adhesive for bonding smc or fiberglass to steel. zero shrinkage; and sands great. Thats how i would attach the flare. As for painting, i would blend the door and completly clear both panels. If the fender and door are sanded and buffed and free of dirt nibs and scratches id scuff the panel with a gray scotchbrite and a little prep-sol. Scuff until the surface is dull and gloss free. Sand your primer with some 600 wet, and spray. I dont care for using a clear base since the metalilcs seem to stand on edge and leave a halo as you blend out your base. follow up with your clear and your done..:dnc

[Author]

Posts