Jiovanny reyes

Forum Replies Created

  • Author
    Posts
  • Jiovanny reyes
    June 19, 2014 at 5:57 am #46835

    wow that makes perfect sense I can picture everything ur saying am gonna try that out thanks man

    Jiovanny reyes
    April 25, 2014 at 2:33 am #46443

    Thanks for the advise i juss dnt like wen am doing something one way an its coming out good and some one that is juss a co worker tellin me wat to do or how to do things .. I like to learn try different things but theas different ways of doing things i feel its wat ever works for u… If i try it and it does work or dnt feel confutable i got back to how i do it …The way u fix a dent might not be the same way some one else does but the results are the same or better..

    Jiovanny reyes
    April 23, 2014 at 5:19 am #46419

    Thanks yea i thought it might be the reducer am using iwata supernova base gun spraying at 19/20 psi . At 78 degree temp.. Using medium reducer.. Am gonna try to use a slower reducer and opening up my fluid tip a lil more am using a 1.3 tip

    Jiovanny reyes
    April 2, 2014 at 3:18 am #46251

    Thanks bro for the tip am sprying rs 2300 clear from rubber seal 2.1… I dnt have a gage on my gun right now i go by noise but am getting a gage tomorrow i will be tryin ur advice see how i make out

    Jiovanny reyes
    March 31, 2014 at 4:33 am #46222

    i had a problem with jams too i work for a very picky boss that had the eye of a eagle he wanted the door jams to look perfect well the only way to do that is to repaint after u paint the outside because no matter what u do sealer travels further and ur always gonna see the sealer line…..but u dnt wanna be repainting every door jam so what i figure out or what i do is i grab a piece of 3000 sand paper scuff the jam wea paint is gonna land mask it with the 3m transition tape which i think is the best for jams better than the foam tape after am done painting the car i see how far the sealer travel if its not to far in i juss hand rub it with compound if is to far in i grab my 3000 sand paper sand the jam carefully and u can see how the sealer line starts to go away as soon as u like wat u see juss hand compound the jam and it looks beautiful no hard lines no nasty over spray,, looks like factory almost… its faster than repainting jams less time and material cost… good results… try it and let me know how u make out,… hopefully i didnt confuse u..lol..

  • Author
    Posts