WEIDERMAN MOTORSPORTS

Forum Replies Created

Viewing 15 posts - 91 through 105 (of 118 total)
  • Author
    Posts
  • February 3, 2011 at 7:16 am #28018

    All I can say is wow… :cheers

    January 31, 2011 at 6:10 pm #27901

    Looks great :cheers color change all black on a suv is a pain

    January 31, 2011 at 4:25 pm #27890

    Great color match :cheers

    January 30, 2011 at 5:35 am #27807

    Nice booth ya got there. Looks like some of my used car work, not ideal but its what they pay for.

    January 27, 2011 at 9:40 am #27692

    [quote=”ryanbrown999″ post=17596]Everybody on the site needs to take notes on this post. This is how a real pro gets it done. :rofl

    Hell Bondo, I wouldn’t tint that. Blend it and send it. Its white, put it outside and it will look great.[/quote]

    X2 Blend n send on a white… :cheers

    January 27, 2011 at 4:54 am #27646

    [quote=”Matrix Paint Systems” post=17555]You want a grey sealer if you are painting white. If you seal white you may end up missing some spots due to not being able to tell the sealer from the base.[/quote]

    Yes make sure it is a very light grey or make your sealer an off white as indicated by a few others. :cheers

    January 26, 2011 at 7:39 pm #27633

    You want a grey sealer if you are painting white. If you seal white you may end up missing some spots due to not being able to tell the sealer from the base.

    January 22, 2011 at 5:40 pm #27526

    X2 on the blender for a gold metallic for solvent base. If your local body shop is willing to mix up the paint for ya i would do that. So if it needs any tinting they can take care of ya. Most paint stores that mix paint for the public have no idea how to tint. Also don’t be misled to thinking just because its dbu or dbc it will match better, the higher dollar lines cover better and often have twice the number of variants. So don’t think that just because it cost more that it will match better. Still have to do a spray out check the variant deck to the fuel door etc.

    January 22, 2011 at 4:35 pm #27525

    I have a box that I made up that will hold clear & hardner, or my body filler depending on what Im using it is insulated with a light bulb to keep at about 75 deg. It will also slide up on one side so I can but a small electric heater on one end to warm it up fast if I forget to leave the bulb on.

    January 21, 2011 at 6:51 pm #27501

    :clappy keep us updated

    January 20, 2011 at 8:44 am #27471

    [quote=”Ben” post=17345]Today was busy with lots of little stuff…I was the only one in the shop :huh:

    Must be working a little to hard if they leave ya by yourself to run the shop :clappy better slow down 😛

    January 15, 2011 at 7:04 am #27196

    Now make sure ya pop the guys collar when ya hand him his keys :rofl :rofl :rofl Great work

    January 15, 2011 at 6:46 am #27194

    Good to see everything is working out. And looking at some of your recent post looks like a win win. :clappy

    January 15, 2011 at 6:33 am #27192

    Great job for the shop. Looking good :pcorn:

    January 13, 2011 at 9:04 pm #27130

    Any update on your experience?

Viewing 15 posts - 91 through 105 (of 118 total)