[raymond]

raymond

September 2, 2011 at 6:20 pm #32723

can i use medium solid clear coat for my project? or i must use high solid clear coat? i heard medium solid is easy to spray but the layer is thin then high solid? it is true?? what the difference is?

thanks

[raymond]

raymond

September 2, 2011 at 6:38 am #32717

im confused with flatting agent. how to mix? cannot wait to watch your new video..hehehe

[raymond]

raymond

September 2, 2011 at 4:24 am #32709

for w400 (not compliant gun) inlet pressure recommended is 29psi..if u go with w400lv (compliant gun) your inlet pressure is around 16-20psi..i also using 100L compressor with 2hp motor with no problem

[raymond]

raymond

September 2, 2011 at 3:43 am #32707

thanks guys..but i want to spray the whole body..can single stage lasting for many years? do single stage paint have UV protection?

[raymond]

raymond

September 2, 2011 at 3:26 am #32706

i am iwata’s w400 lv2 user..i love my gun..i only use for clear..fine atomizing..minimize orange peel..w400 is one of the famous clear coat gun

[raymond]

raymond

September 1, 2011 at 7:11 am #32695

thanks for your help Fisheye..yes clear im using is one of the famous clearcoat in my country. i believe everybody have a different tecnique..my tecnique is almost same with your step..im spraying fast if distance from subject is close to avoid clear run/drip

[raymond]

raymond

September 1, 2011 at 5:56 am #32691

maybe this product only available in asia..but dupont is available in my country..how to minimize orange peel?

[raymond]

raymond

September 1, 2011 at 4:13 am #32688

im using kansai paint from japan..not sure its available at your country or not but many painter & factory in asia like honda,toyota & nissan using it. my job done very well..i 100% follow tec data sheet..can i wet sanding & buff with 2 layers clear coat? or i need more coats?

thanks

[Author]

Posts