richard wragg
Forum Replies Created
- AuthorPosts
- October 1, 2011 at 11:21 am #33261
Hi there mate as you were one of the most helpfully guy’s out there, I am going to ask you which gun you would recommend to me to by, no pressure I need a good one to get the best results, but I probable don’t need top of the range with special functions (or do I) the devibis gti looks good. this is for base coat and clear, you were dead right about my FLG 5 it is for primer high build etc and it is a good one for that. I won’t bother you to much but any anvice would be great thanks very much Richard
September 27, 2011 at 10:44 am #33209every thing is going ok, till i put on the 2k base and got orange peel, i have set the line presure to 30 psibut still get it, also the gun doe’s slater a bit i am going to get a clean up kit for the gun (divilbisflg) any ideas? :welc
September 24, 2011 at 10:34 am #33095Hi again if i use a 2k primer and base coat can i wet sand the primer or is that a big no no. thank y richard 😆
September 23, 2011 at 11:07 am #33077Hi it will be very interesting to see how you get on, I have considered spraying inside the home but did not know how to go about it.
September 19, 2011 at 11:23 am #33004I think my problem is I missed lots of holes when sanding and they show up now so I will try the polyester putty and post a pic. thanks Richard
- AuthorPosts