[Pål Caspersen-Haugerød]

Pål Caspersen-Haugerød

December 2, 2011 at 9:33 pm #34479

Are you sure you don´t ruin your adhesion??

[Pål Caspersen-Haugerød]

Pål Caspersen-Haugerød

November 15, 2011 at 3:22 am #34199

That was actually relevant
Will try

[Pål Caspersen-Haugerød]

Pål Caspersen-Haugerød

November 15, 2011 at 2:35 am #34198

As written in the TDI you have a potlife 1,5 to 3 hrs
It does change spayability and you should add 10 to 15 % extra AW activator

[Pål Caspersen-Haugerød]

Pål Caspersen-Haugerød

November 15, 2011 at 2:27 am #34197

Hi im´, a norwegian tech rep
AW Hardener is a great product. It gives you a lot of advantages.
It binds all the AW coats into one and makes it harder(very good for 3 Coat)(Also easy to sand away imperfections in the basecoat, if any.
Since you should not apply more then 25 microns (dry film) otherwise you can loose gloss.
better if you penetrate the clearcoat because the AW will not absorbe moisture so easily.
And the adhesion between AW and Superior will become a lot better.

[Author]

Posts