Greg
Forum Replies Created
- Posts
When I demod that gun u have to half pull the trigger and hold the on button on the regulator then it turns on. Wasny crazy about it for sure
I would have to agree ding. Nr 1.4 for sealer. And base. I fell in love with this gun! And I broke down and got a 300 needle nozzle set. Yes the one I paid 50 bones for….
Jay those look good! Like glass. Most of my jobs I try to get a little peel to match the fac finish. But just out of curiousity on the top pic. What type of clear are u using? That was with a 3000 or 4000 rp? I haf a 3000 rp for a bit. I sanded lots of sags… I like the 4000 for that matter. No curtains…. lol
The interior and floorpan is where most the damage is. Blew every bag but th steering wheel and dash. There is a lot there for ae minor as it looks
Doesnt look bad at all tilp the closer u get…. I didnt thno it ould come close to total at frst glance. But ts gettn up there. Needs a hole lo u ca nt se here.
had similar problems when i sprayed buick enclave moldings. i did a clear semi gloss. not the same product as what u used. but my problem was not getting it mixed up good. resanded and shaked the hell at of the clear and it layed down great. not a fan off eggshell and semigloss…. bc u cant buff it!!!
well i did not know that about black. also why do tri coats need 57? i never have done this and it came out good. other than problems matching the color…. im not disagreeing with u just curious as to why
i have never used the 57. activator correct? im getting options of 1 to 1.25 1 to 1.5 and 1.1. also when im mixing tri coats it gives me a message to consult p sheets before reducing? why am i getting this message? read the p sheet and didnt see anything on it.
do u usually reduce it 1 to 1? the touchmix gives me several options…
good to know!
how much less? say ur used to painting a bumper with 16 oz of paint how much would u use with wb. considering im possibly switching from deltron to enviro
i have the pull to get envirobase. just nervous because i have never sprayed wb. dont want to open the door to a boat load of new problems…
yes i have wanted to try finer strainers. when i asked the paint rep about them he said it would change the color if its to fine. how fine are the pps strainers?
but dont over reduce? i have been using 885 in all my base. i used to have the booth set at 85 for this. i did just recently turn it down to 75 tho. did u spray deltron with a 1.3?
yes i have and want to. but what i have heard about waterborne is u have to be able to control the humidity in the booth. which i cannot do with this booth. and wichita can be humid as hell. is there truth to this?