Brent Kloppenburg

Forum Replies Created

  • Author
    Posts
  • Brent Kloppenburg
    October 16, 2013 at 3:48 am #44974

    Thanks,
    Yes it is PPG das sealer and it is the second coat, I have never seen anything look like it before, but it is my first time using the ppg prep system.

    Thanks

    Brent Kloppenburg
    October 16, 2013 at 2:59 am #44972

    Thanks, I am using das sealer but I may have a problem, I used the one choice plastic prep system, and the surface just didn’t look right after doing the prep, I then applyed the das sealer, it looked blotchey, or something like fisheyes without the craters, or like spots all over it. So I wet sanded the sealer and re sprayed it, Still looks like spots on a lepoard, is that normal, after preping and sealing a plastic ?

    Thanks, for the help

    Brent Kloppenburg
    September 14, 2013 at 4:07 am #44483

    From what the PPG P sheet for 2042 clear states when off the car it needs a flex agent.
    I was hoping I would not need it but PPG says I need to add dx814

    Brent Kloppenburg
    September 13, 2013 at 3:40 am #44463

    I have one other problem, I am painting the bumper off the vehicle, I can’t find DX814 flex add. locally, I had my friend check in Washington state and they wanted $178.00 for a pint. I can get slv814 for about $75.00 but don’t know if it will work with the 2042 clear. Anyone know where I can get dx814 at a reasonably price?

    Brent Kloppenburg
    September 10, 2013 at 4:56 am #44448

    I talked with the main store ( they have 4 stores ) and They are going to have me return the sealer and get the correct one.

    Thanks for all the info !!

    Brent Kloppenburg
    September 9, 2013 at 5:12 am #44438

    Thanks,
    I called PPG and asked them and they said that I should not use the ecs27 as a sealer as they are not compatable with dbc base.
    But this is what my ca. ppg dealer sold me. Go figure..only in Ca.

    Thanks.

  • Author
    Posts