brad graham
Forum Replies Created
- Posts
my paint rep he worksfor dupont told me that when he does a conversion he pushes the standox or spies hecker he dont like the dupont promax at all
yes every thing is still goin fine the other 2 locations tho are not havin good luck with it dont know y i just spray the stuff and move on to the next one
iwata w400 with the old lv2 tip in 1.4 is purtyfast forclear also but i like the rp 3000 in 1.4 also either one works well with sikkens hs clear
they sell both herenever sprayed de beers but i here it does good thebiggest shop intown uses it byrds sells to them also
naw premier auto color now when we used sikkens we used byrds automotive
guy who trained me is from huntsville think he just works north alabama and mid to east tennesee
who is yourdupont rep painterman1 the guy who trainied me isjeff peirce saidhewasfrom alabama but he goes in to tennessee also he was cool seemed to know what he was doin
no money on material i know it cost morethan the autobase plus and the clear is higher than the hs plushad to switch to another pps system for water borne its cost more got a new gun cleaning system it cost more got 3 different produxcts for primer sealers instead of just color build for primer and sealers
i havnt had any trouble with the stando blue yet but theres no way its faster than the sikkens autobase plus i dont care what they say or what theboss says thenumbers arethere no way it faster not even close i was doin 5 to 7 booth cycles a day with the sikkens i cant do 5 with stando blue most of the time im doin 3 i know it newto me and i sprayed sikkens for 13 years but its not as fast period
any ideas on what i can put on the paint booth floor to keep the dust down when i bring the blowers in to dry the base ive been just wettting the floor but im sure there some thing else that might work better cuz wetting the floor seems to raise the humidity lil bit that big fan they left is portable it has a tube out the back where it exahust out the back i tied it up where its pointing st8 up that helps with the dust somewhat its not horrable but i was use to not buffing at all with the sikkens the booth i use is a accudraft it works really good excellent air flow
standox rep left me 2 hand held blowers with a tree and a bigger fan to use on bigger jobs it works really good
its been takin about 15 min to dry it but our humidity has not been high around 20 to 30 % and i had to bump heat in booth up to about 85
cool i will remember that i havnt had trouble blending it yet but im sure i will have some colors harder to blend out i put the slower adjuster in the color blender to slow it down i just dont like pileing the base on like they want you to do iti trieddoin a blend like they recomend i found it way easier to do it like i have allways done it cover my blend panelsup color my panels uncover the blend panels spray the blender on it blend color way easier for methey wanted meto do the blends 1st then color the panels both ways work just easier for me the other way
well then i have the new one it reads the flake only time i used the hardner in the base was on a 3stage pearl have to put hardner inthe ground coat we used the camera on it and read it like it was solid color and used the standard pearl workedreally good
dont know if it the new camera or the old one and yeahthe color decks dont match some of the onesive lookedatthepaint isall funky looking on them i sure hope we dont have a peeling problem like some of the other post ive read about